Air Particle Monitor

Liên hệ

Air Particle Monitor continuously monitors the number and mass concentration of fine particles such as dust, aerosols floating in space.
It is ideal for managing manufacturing and working environments such as precision work rooms and clean booths.

Brand: Matsushima
Origin: Japan


It can be used for health management and quality maintenance through constant monitoring . There are many situations where dust is generated during the production process at the factory, and there are concerns about the impact on health and production activities. In particular, the smaller the particles, the more concerned about their health impact. In addition, high-performance products may malfunction if dust or other substances get mixed in during the production process, resulting in a drop in quality. Therefore, constant monitoring of microparticles becomes important.


  • Giám sát 24/7 thay mặt con người. Never miss a microparticle!
  • Labor saving by controlling the cleaning device with external output
  • Ascertain the situation anytime, anywhere using a PC or smartphone from a remote location

Operating principle

Air Particle Monitor uses a light scattering method. For example, if you illuminate the darkness with a flashlight, you can see dust floating in the space. This is because the light emitted from the flashlight hits dust in the air and the scattered light reaches your eyes. This is the basic principle of the light scattering method. By using a laser diode instead of a flashlight and a photodiode that receives specific light instead of a human eye, the light scattered from dust is converted into electrical signals to measure the concentration and number of fine particles. In addition, an induction fan is installed in order to take in floating microparticles into the sensor.

How to use?

  1. Determine the mounting position:

    Decide where you want to monitor airborne particles in your room. It is best near where particulate originates or flows. And please secure the power supply.
  2. Mounting:

    Since it uses Wi-Fi, install it in an environment with good visibility and few obstacles. Check the top and bottom of the main unit and point the suction port in the direction where fine particles are generated.
  3. Wiring:

    Wire the power supply and, if necessary, the analog output and contact output. An optional power jack allows connection to an electrical outlet.
  4. Adjustment:

    Connect your PC or smartphone to the main unit using Wi-Fi. Access from a PC or smartphone browser to check and set measurements.


Scroll to Top