Specifications:
- Cable material according to drinking water regulations (KTW approved)
- Sand slinger and mechanical seal for high performance in sand
- High efficiency electrical design for low operation cost
- All motors prefilled and 100 % tested
- Max. storage temperature -15 °C – + 60 °C
- Design for retrofitable PT100 sensor
- Approved Franklin Electric Kingsbury type thrust bearing
- Non contaminating FES 93 filling
- Sand fighter® SiC seal system is standard
- Standard Motors complete 304SS
Technical Specifications:
- 6-inch NEMA flange with Studs (M 12)
- Protection: IP 68
- Starts per hour: max. 20
- Installation orientation: Vertical / horizontal (shaft end heightened) – 37kW motors may not be installed horizontally
- Motor Lead in 4 m length (KTW approved)
- Voltage tolerance 50 Hz: +6 % / -10 % (Standard: 415 + 6 % = 440 V, 380 – 10 % = 342 V)
- Voltage tolerance 60 Hz: +/-10 % Standard: 460 + 10 % = 506 V, 460 –10 % = 414 V)
- Motor protection: Select thermal overloads according to EN 61947-4-1
- DOL / YΔ – start (pos. of cables 90°)
- Standard motor with PPC winding insulation (37 kW in standard with PE2/PA insulation) for max. ambient temp. of 30 ºC with a min.cooling flow:
- 4 kw – 15 kw v = 0,2 m / s
- 18,5 kw – 37 kw v = 0,5 m / s
Options
- Other voltages
- Motors in complete 316SS and 904 L
- Motors up to 30kW with PE2/PA winding insulation for max. ambient temp. of 50 °C at the same cooling conditions as standard (37 kW max. 4 5°C)
- PT 100 temperature sensor (sold separately)
- Lead in different lengths up to 50 m
Catalogs & Brochures
Download
Download
Manuals
Download
Download
