Specifications:
- Easy to assemble with double flange
- Cable material according to drinking water regulations (VDE / ACS / KTW approved)
- Sand fighter® SiC seal system for high performance in sand
- High efficiency electrical design for low operation cost
- Standard Motor: WW- Water well Design (Stator 304SS / Castings – CI Powder coated)
- All motors prefilled and 10 0% tested
- Max. storage temperature -15 °C – + 60 °C
- Design for retrofitable PT100 sensor
- Non-contaminating FES 93 filled design
Technical Specifications:
- 30.0 – 93.0 kW
- 8-inch NEMA flange
- Protection: IP 68
- Starts per hour: max. 10
- Installation orientation: Vertical / horizontal (shaft end heightened) – 93kW motors may not be installed horizontally
- Motor Lead in 6 m length (KTW approved)
- DOL – start / YΔ – start (pos. of cables 90°)
- Standard voltage: 380-415 V/50 Hz, 460 V/60 Hz
- Voltage tolerance 50 Hz: -10% / +6% UN [380-415 V = (380-10%) – (415+6%)]
- Voltage tolerance 60 Hz: ±10% UN
- Motor protection: select thermal overloads according to EN 61947-4-1
- Standard motor with PPC winding insulation
- For max. ambient temp. of 30 ºC with a min. cooling flow:
- 30 kw – 52 kw v = 0,2 m / s
- 55 kw – 93 kw v = 0,5 m / s
Options
- Other voltages
- Motors in complete 316 SS and 904 L
- PE2/PA winding insulation for max. ambient temp. of 50 °C at the same cooling conditions as standard
- PT 100 temperature sensor (sold separately)
- Lead in different lengths up to 50 m
Catalogs & Brochures
Download
Download
Manuals
Download
Download
