{"id":4003,"date":"2024-01-05T08:56:33","date_gmt":"2024-01-05T08:56:33","guid":{"rendered":"http:\/\/hvc-vn.com\/san-pham\/load-flow-detector\/"},"modified":"2024-01-05T08:56:33","modified_gmt":"2024-01-05T08:56:33","slug":"load-flow-detector","status":"publish","type":"product","link":"https:\/\/hvc-vn.com\/en\/products\/load-flow-detector\/","title":{"rendered":"Load Flow Detector"},"content":{"rendered":"

Advantates<\/h4>\n
    \n
  1. Out-of-load can be detected in advance to avoid quality defects in subsequent processes.<\/li>\n
  2. It\u200b\u200b can also be used to predict clogging and overflow of conveyor transfer chutes.<\/li>\n
  3. When transporting multiple raw materials on a single conveyor, mixing of raw materials can be avoided because the next raw material can be added after confirming that the load is completely exhausted.<\/li>\n
  4. Detecting that a load has arrived at a certain position on the conveyor and activating the conveyor in the post-process will lead to energy saving.<\/li>\n<\/ol>\n

    Operating principle<\/h4>\n

    Install the detection vane as shown in the figure in the direction of the load flow. The detection lever tilts when there is a load on the belt conveyor. Depending on the tilt angle, the contact will be output to inform you. It supports 2 contact outputs, and the detection angle and contact output are as follows.<\/p>\n

      \n
    • Contact output 1: ON at 15\u00b0 or more (for NC connection)<\/li>\n
    • Contact output 2: OFF at 60\u00b0 or more (in the case of NC connection), the detection angle becomes 0\u00b0 when there is no load.<\/span><\/li>\n<\/ul>\n

      \"\"

      Specifications:<\/h4>\n

      \"\"\"\"