{"id":3873,"date":"2024-01-04T02:52:01","date_gmt":"2024-01-04T02:52:01","guid":{"rendered":"http:\/\/hvc-vn.com\/san-pham\/tilt-switch\/"},"modified":"2024-04-09T01:41:25","modified_gmt":"2024-04-09T01:41:25","slug":"tilt-switch","status":"publish","type":"product","link":"https:\/\/hvc-vn.com\/en\/products\/tilt-switch\/","title":{"rendered":"Tilt Switch"},"content":{"rendered":"

Advantages<\/h4>\n
    \n
  1. Not affected by adhesion or electrical characteristics of measured object. Effective when capacitance method cannot detect due to its low relative permittivity. <\/li>\n
  2. Suitable for detecting solid materials. Capacitance or paddle type may break equipment when detecting solid materials, but Tilt Switch housed in a sturdy cast metal case are safe because of their shock-resistant construction. Specific gravity is 1.0 or higher, and solid materials with a grain size of 30 mm or more can be detected. <\/li>\n<\/ol>\n

    Features<\/h4>\n
      \n
    • Not affected by electrical characteristics<\/li>\n
    • Adhesion- and friction-resistant structure<\/li>\n
    • Also supports detection of powders and granules<\/li>\n<\/ul>\n

      Operating principles<\/h4>\n

      Sensor (detection unit) of Tilt Switch has a built-in tilt switch. When sensor is not in contact with object to be measured, contact between A and B is closed (NC state) via an iron ball.
      \nWhen sensor is inclined due to accumulation of measured object, iron ball in the inclination switch rolls and contact point between A and B is opened (NO state). In principle, the sensor is not affected by floating dust or adhered objects.<\/p>\n

      \"\"

      How to use?<\/h4>\n
        \n
      1. Decide mounting position<\/strong>
        \n\"\"
        \nAvoid direct contact of sensor with an object to be fed, as impact may cause false detection or damage.
        \nSince sensor is designed to detect inclination, install it in a location where there is enough space so that it will not hit a wall or the like even if it is inclined.<\/li>\n
      2. Mounting<\/strong>:
        \n\"\"